The maintenance required light on a Scion Tc is an indication that the vehicle is due for routine maintenance. This may include an oil change, tire rotation, and other basic services. The light is meant to remind drivers to keep up with their vehicle’s maintenance in order to avoid more serious issues down the road.
In most cases, it simply means that it’s time for your next scheduled service. However, if the light is blinking or remains on after you’ve performed the recommended service, there may be a more serious problem with your car. In this case, it’s best to take it to a qualified mechanic for diagnosis and repair.
By understanding what the maintenance required light means on your Scion TC, you can keep your car running properly and avoid costly repairs down the road.

How to Turn off Maintenance Light on Scion TC 2016?
If you own a Scion TC 2016, you may have noticed the maintenance light come on occasionally. This is normal and nothing to be concerned about, as it’s simply reminding you to perform some basic maintenance tasks. Here’s how to turn off the maintenance light:
1. Start the engine and let it idle for a few minutes.
2. Turn off the engine and open the hood.
3. Locate the dipstick near the front of the engine bay and remove it.
4. Wipe off the dipstick with a clean cloth or paper towel, then reinsert it fully into its housing.
5. Push and hold the “trip odometer reset” button located on the instrument cluster (it’s usually labeled with a picture of an oil can). Keep holding this button while you turn on the ignition (but don’t start the engine).
After about 10 seconds, release the button; this should turn off your maintenance light!

How to Reset Maintenance Light on Scion TC 2015?
If your Scion TC 2015 needs an oil change, the maintenance light will come on to remind you. Once you’ve changed the oil, you’ll need to reset the maintenance light. Here’s how:
1. Start the car and turn off all accessories.
2. Press and hold the trip meter button on the left side of the steering wheel.
3. While holding the button, turn on the ignition (don’t start the engine).
4. Continue holding the button until “MAINT REQD” appears in the display. Release the button and press it again briefly to confirm the resetting of the maintenance light.
2010 Scion TC Maintenance Light Reset
If your 2010 Scion TC’s maintenance light is on, you’ll need to reset it. Here’s how:
1. Start the engine and let it idle for a few minutes.
2. Turn off the engine and wait a few seconds.
3. Press and hold the trip meter reset button while turning the ignition switch to the ON position.
4. Release the button when the maintenance light comes on.
It should now be reset!

Maintenance Required Light Scion TC
The maintenance required light on a Scion TC comes on every 5,000 miles or 6 months to remind you that it is time to have your vehicle serviced. This light is simply a recommendation, but it is important to have your vehicle serviced regularly to prevent major problems down the road.
Here are some of the typical maintenance services that may need to be performed when the maintenance required light comes on:
- Oil change
- Fluid check (brake fluid, transmission fluid, coolant, etc.)
- Tire rotation
- Brake inspection
- Air filter replacement
- Cabin air filter replacement
- Multi-point inspection
You can reset the maintenance required light yourself by following these steps:
- Turn the ignition key to the “Off” position.
- Press and hold the trip reset button.
- Turn the ignition key to the “On” position.
- Continue to hold the trip reset button until the maintenance required light turns off.
- Release the trip reset button.
If you are not comfortable resetting the maintenance required light yourself, you can take your vehicle to a Toyota or Scion dealership or a qualified mechanic.
Here are some additional tips for maintaining your Scion TC:
- Use the recommended oil and oil filter.
- Check your tire pressure regularly and inflate your tires to the recommended pressure.
- Get your brakes inspected and serviced regularly.
- Get your car washed and waxed regularly to protect the paint.
- Have your car inspected by a qualified mechanic at least once a year.

Scion TC Maintenance Required Light Reset
If you’re the owner of a Scion TC, you may have noticed the maintenance-required light on your dash. This light is an important reminder to keep up with regular maintenance on your vehicle. Here’s how to reset the maintenance required light on your Scion TC:
1. Start the engine and let it idle for about 5 minutes.
2. Turn off the engine and open the hood.
3. Locate the oil dipstick and remove it from its housing. Wipe any oil off the dipstick with a clean rag.
4. Insert the dipstick back into its housing and screw the cap back on tightly.
5. Close the hood and start the engine again. The maintenance required light should now be reset!
2006 Scion Tc Maintenance Light Reset
If your 2006 Scion TC’s maintenance light is on, you’ll need to reset it. Here’s how:
1. Start the engine and let it idle for a few minutes.
2. Turn off the engine and open the hood.
3. Disconnect the negative battery terminal.
4. Wait a few minutes, and then reconnect the negative battery terminal.
2007 Scion TC Maintenance Required Light
The 2007 Scion TC has a maintenance required light that comes on every 5,000 miles or 6 months, whichever comes first. This light is a reminder that it is time to have your vehicle serviced.
There are a number of things that a mechanic will typically check when the maintenance required light is on, including:
- Oil level and condition
- Fluid levels (brake fluid, transmission fluid, coolant, etc.)
- Tire pressure and condition
- Brake pads and rotors
- Air filter
- Cabin air filter
- Other general maintenance items
In addition to these routine maintenance items, a mechanic may also check for any other problems with your vehicle.
It is important to have your 2007 Scion tC serviced regularly, even if the maintenance required light is not on. This will help to keep your vehicle in good condition and prevent major problems down the road.

Scion Tc Maintenance Schedule
The Scion TC is a great car, but like any car, it needs regular maintenance to keep it running smoothly. Here is a rundown of the basic maintenance schedule for the Scion TC.
I. Every 5,000 Miles
-Change the oil and filter
-Inspect the brakes
-Inspect the tires and adjust tire pressure if needed
-Inspect the suspension components and steering system
-Check all fluid levels and top off as needed
-Check for leaks under the vehicle
II. Every 20,000 Miles
– In addition to everything in section I,
III. 30,000 Miles
– In addition to everything in sections I & II,
IV. 40,000 Miles
– In addition to everything in sections I, II, & III,
V. 50,000+ Miles
– Repeat all procedures from previous intervals as necessary
Following this basic maintenance schedule will help keep your Scion TC running great for years to come!
Scion TC Maintenance Light Flashing
If your Scion TC’s maintenance light is flashing, it’s important to take action immediately. This light is an indication that something is wrong with your car and needs to be fixed. Ignoring the problem could lead to more serious issues down the road.
There are a few different things that could trigger the maintenance light on your Scion TC. It could be something as simple as a loose gas cap or a dirty air filter. Or, it could be something more serious, like an engine issue.
If you’re not sure what’s causing the light to flash, take your car to a qualified mechanic and have them take a look. Don’t ignore your Scion TC’s maintenance light if it starts flashing. Take action right away to avoid any further damage to your vehicle.

2011 Scion Tc Maintenance Light Reset
If your Scion TC’s maintenance light is on, it’s time to bring it in for service. But before you do, you can reset the light yourself. Here’s how:
1. Start the engine and let it idle for a few minutes.
2. Turn off the engine and wait a few seconds.
3. Press and hold the trip meter reset button while you turn on the ignition.
4. Continue holding the button until the maintenance light starts blinking. It should take about 10 seconds or so.
5. Release the button, and your Scion TC’s maintenance light will be reset!
Toyota Scion Maintenance Required Light
The Toyota Scion maintenance required light is a reminder that it is time to have your vehicle serviced. This light typically comes on every 5,000 miles or 6 months, whichever comes first. However, the interval between maintenance services can vary depending on your vehicle’s model year and driving conditions.
The Toyota Scion maintenance required light comes on every 5,000 miles or 6 months, whichever comes first. This light is a reminder that it is time to have your vehicle serviced.
There are a number of things that a mechanic will typically check when the maintenance required light is on, including:
- Oil level and condition
- Fluid levels (brake fluid, transmission fluid, coolant, etc.)
- Tire pressure and condition
- Brake pads and rotors
- Air filter
- Cabin air filter
- Other general maintenance items
In addition to these routine maintenance items, a mechanic may also check for any other problems with your vehicle.
It is important to have your Toyota Scion serviced regularly, even if the maintenance required light is not on. This will help to keep your vehicle in good condition and prevent major problems down the road.
Here are some additional tips for maintaining your Toyota Scion:
- Use the recommended oil and oil filter.
- Check your tire pressure regularly, and inflate your tires to the recommended pressure.
- Get your brakes inspected and serviced regularly.
- Get your car washed and waxed regularly to protect the paint.
- Have your car inspected by a qualified mechanic at least once a year.
Here are some additional tips for resetting the maintenance required light on a Toyota Scion:
- Turn the ignition key to the “Off” position.
- Press and hold the trip reset button.
- Turn the ignition key to the “On” position.
- Continue to hold the trip reset button until the maintenance required light turns off.
- Release the trip reset button.
If you are not comfortable resetting the maintenance required light yourself, you can take your vehicle to a Toyota or Scion dealership or a qualified mechanic.

Why is My Maintenance Required Light on Scion Tc?
There are a few reasons why your maintenance required light might be on in your Scion TC:
- Scheduled maintenance: The maintenance required light comes on every 5,000 miles or 6 months, whichever comes first, to remind you to have your vehicle serviced. This includes things like oil changes, fluid checks, and tire rotations.
- Overdue maintenance: If you haven’t had your vehicle serviced in a while, the maintenance required light will come on to remind you.
- Sensor problem: In some cases, the maintenance required light can come on due to a problem with the sensor that triggers it. If you’re not sure why your light is on, it’s best to take your vehicle to a qualified mechanic to have it diagnosed.
Here are some of the things that a mechanic will typically check when the maintenance required light is on:
- Oil level and condition
- Fluid levels (brake fluid, transmission fluid, coolant, etc.)
- Tire pressure and condition
- Brake pads and rotors
- Air filter
- Cabin air filter
- Other general maintenance items
Once the mechanic has identified the reason for the maintenance required light, they can perform the necessary service and reset the light.
It’s important to have your Scion TC serviced regularly, even if the maintenance required light is not on. This will help to keep your vehicle in good condition and prevent major problems down the road.
What Does the Maintenance Required Light Mean on a Scion Tc?
The maintenance required light on a Scion TC means that the vehicle is due for routine maintenance. This includes things like oil changes, tire rotations, and other basic maintenance tasks. Depending on how well you take care of your car, the frequency of these services will vary.
However, it’s generally recommended that you get your car serviced every 5,000 miles or so.
What Can Cause Maintenance Required Light to Come On?
There can be a few different reasons why your maintenance-required light comes on. It could be something as simple as needing an oil change, or it could indicate a more serious issue with your vehicle. If you’re not sure what the problem is, it’s always best to take it to a mechanic and have them take a look.
One of the most common reasons for the maintenance-required light to come on is simply because you need an oil change. Over time, your engine oil gets dirty and needs to be replaced in order to keep your engine running smoothly. Most mechanics will recommend getting your oil changed every 5,000 miles or so, but this may vary depending on the type of vehicle you have.
Another potential reason for the light coming on is if there’s an issue with one of your sensors. Sensors are used by your car to monitor various systems and components, and if one of them isn’t working properly, it can trigger the maintenance-required light. In some cases, cleaning or replacing the sensor will fix the problem.
However, if the sensor itself is damaged, it may need to be replaced entirely. If you see that dreaded maintenance-required light come on in your car, don’t panic! It could be something as simple as needing an oil change, or it could be a sign of a more serious issue.
Either way, it’s always best to take it to a mechanic so they can diagnose and fix the concern for you.
How Do You Turn Off the Maintenance Required Light on a Scion TC?
Assuming you would like a blog post discussing how to turn off the maintenance required light on a Scion TC: “How do you turn off the maintenance required light on a Scion TC?” If you own a Scion TC, chances are you will eventually see the “maintenance required” light come on in your car.
This is a reminder from your car that it is time for regular service. But don’t worry, it’s easy to reset the required maintenance light yourself! Just follow these simple steps:
1. Start by finding the diagnostic link connector under the hood of your car. It should be located near the battery.
2. Once you have found the connector, use a jumper wire or paperclip to connect terminals 4 and 13 together.
3. Keep the terminals connected for at least 5 seconds, then disconnect them and close up your hood.
4. That’s it! The maintenance-required light should now be reset and won’t come back on until it’s actually time for service again.
2005-2010 Scion TC Maintenance Required Light Reset Procedure
What Does Maintenance Required Mean on a 2007 Scion Tc?
If you see the “Maintenance Required” light on your 2007 Scion TC, it means that it’s time for scheduled maintenance. This includes things like oil changes, tire rotations, and air filter replacements. Depending on how long it’s been since your last service, you may need to do more than one of these at a time.
The good news is that this light is easy to reset once you’ve completed the necessary maintenance.
2007 Scion TC Maintenance Required Light Reset
To reset the maintenance required light on a 2007 Scion tC, follow these steps:
- Turn the key to the “On” position without starting the engine.
- Locate the odometer button on the instrument cluster.
- Press and hold the odometer button while turning the key to the “Off” position.
- Continue holding the button and turn the key back to the “On” position.
- Keep holding the button until the maintenance light blinks and resets.
2008 Scion TC Maintenance Light Reset
To reset the maintenance light on a 2008 Scion tC:
- Turn the key to the “On” position without starting the engine.
- Press the trip/reset button on the instrument cluster until the maintenance light is displayed.
- Hold down the trip/reset button until the maintenance light starts flashing.
- Release the button, turn the key to the “Off” position, and then start the vehicle. The maintenance light should be reset.
2014 Scion TC Maintenance Light Reset
To reset the maintenance light on a 2014 Scion tC:
- Turn the key to the “On” position without starting the engine.
- Locate the trip/reset button on the instrument cluster.
- Press and hold the trip/reset button until the maintenance light is displayed.
- Release the button and then press and hold it again until the maintenance light starts flashing.
- Release the button, turn the key to the “Off” position, and then start the vehicle. The maintenance light should be reset.
Conclusion
The Scion TC is a great car, but like any other car, it needs regular maintenance. One of the most important things to do for your TC is to check the maintenance-required light. This light will come on when the car needs an oil change or other service.
By checking this light regularly, you can keep your TC in top shape and avoid expensive repairs.