If your Suorin Air Plus is consistently blinking, it’s essential to address the issue promptly to ensure the proper functioning of your vaping device. A blinking Suorin Air Plus may signal various issues, ranging from battery problems to connection issues with the pod. In this guide, we’ll explore potential reasons behind the blinking and provide insights into troubleshooting steps to help you enjoy a seamless vaping experience.
Why is My Suorin Air Plus Not Hitting?
If you’re wondering why your Suorin Air Plus isn’t hitting as hard as it used to, there are a few potential reasons. The first thing to check is whether the battery needs to be replaced. If it’s been a while since you’ve replaced the battery, that could be the issue.
Another possibility is that the atomizer coils need to be replaced. Over time, they can build up gunk and debris that affects their performance. Finally, make sure that the airflow holes aren’t blocked.
If they are, that can restrict the amount of air that gets to the coils and produce a less powerful hit.
Why is My Suorin Air Pro Blinking Green?
If your Suorin Air Pro is blinking green, it means that the battery is fully charged and ready to use. If the light is blinking red, it means that the battery is running low and needs to be recharged.
Suorin Air Blinking Blue Not Hitting
If your Suorin Air is blinking blue and not hitting, there are a few things you can do to troubleshoot the issue. First, make sure that the battery is fully charged. If it’s not, charge it for at least 30 minutes before trying again.
Next, check to see if the atomizer coil is properly installed and screwed in tight. If it’s not, screw it in until it’s snug. Finally, make sure that the airflow holes on the bottom of the atomizer coil are clear and not blocked by anything.
If they’re blocked, clear them out and try again.
Suorin Air Pro Blinking Blue Light
The Suorin Air Pro is a pod-based vaping device that has a built-in battery and can be charged via USB. It has a sleek, minimalist design and is available in black or silver. The Air Pro uses 0.5ohm pods and comes with two of them in the box.
It has a wattage output of 20W and can be fired up to 15W with the included 0.5ohm pod installed. The device also features an LED light that indicates when it’s time to recharge the battery. When the light starts blinking blue, it means that the battery is running low and needs to be recharged.
To do this, simply plug the USB charger into the side of the device and wait for the LED light to turn green, which means it’s fully charged. The Suorin Air Pro is a great option for those looking for a simple, easy-to-use vaping device that doesn’t require any messy coils or tanks to fill up. Just pop in a pod, charge it up, and you’re ready to go!
Suorin Air Blinking Blue Light When Hitting
If you’re a fan of vaping, then you’ve likely heard of the Suorin Air. This popular device has become a favorite among vapers for its sleek design and powerful performance. But what happens when your Suorin Air starts blinking blue light when hitting?
There are a few things that could be causing this issue. First, it’s possible that the battery is running low and needs to be recharged. Alternatively, the atomizer may need to be replaced.
Finally, it’s also possible that there is simply something wrong with the device itself. If you’re experiencing this problem, don’t panic! There are a few simple steps you can take to troubleshoot the issue.
First, check to see if the battery needs to be charged. If so, simply plug it in and allow it to charge until the light turns green. Next, take a look at the atomizer and make sure that it isn’t damaged or clogged.
If it looks fine, then try replacing it with a new one. Finally, if all else fails, contact Suorin customer service for assistance.
Suorin Air Pro Blinking Green 8 Times
If you’re a vaping aficionado, you know that there are all sorts of different devices on the market. Some are better than others, and some have more features than others. But one thing that all vapers have in common is that they want a device that is easy to use and gives them great results.
The Suorin Air Pro is a great option for those who are looking for an easy-to-use device with plenty of features. One feature that sets the Suorin Air Pro apart from other devices is its blinking green light. When the light blinks eight times, it indicates that the battery is fully charged and ready to go.
This is a great feature for those who don’t want to be constantly checking their battery levels.
How to Clean Suorin Air Pro?
Suorin Air Pro is a great little device, but it can be a bit of a pain to keep clean. Here are some tips on how to get your Suorin Air Pro looking and functioning like new:
1) First, disassemble the device by removing the pod and battery.
2) Next, using a cotton swab or similar object, clean the connection points on both the pod and battery. Be sure to remove any dirt or grime that may have accumulated.
3) Once the connection points are clean, reassemble the device.
4) To clean the outside of the device, simply wipe it down with a damp cloth. Avoid getting any water inside thedevice as this could damage it.
5) Finally, recharge the battery before use.
Suorin Air Pro Light Won’T Turn off
If you own a Suorin Air Pro and you’re having trouble getting it to turn off, there are a few things you can try. First, make sure that the pod is properly inserted into the device. If it’s not, that could be causing the problem.
If the pod is inserted correctly and the device still won’t turn off, try pressing and holding the power button for 10 seconds. This should reset the device and hopefully get it working properly again. If neither of those solutions work, then your best bet is to contact Suorin customer service.
They may be able to help you troubleshoot the problem or replace your device if it’s defective.
Why Does My Suorin Air Keep Blinking?
There are a few reasons why your Suorin Air may keep blinking. One reason could be that the battery is not fully charged. If the battery is not fully charged, the Suorin Air will let you know by blinking.
Another reason could be that the cartridge is not properly inserted. If the cartridge is not properly inserted, it will also cause the Suorin Air to blink. Finally, if neither of those are the issue, then it’s possible that there is something wrong with the device itself and you should contact customer support.
Why is My Vape Blinking Blue And Not Hitting?
If your vape is blinking blue and not hitting, there are a few potential causes. First, make sure that your battery is fully charged. If it’s not, charge it for a few hours before trying again.
Next, check to see if the coil needs to be replaced. To do this, remove the coil and look for any signs of burning or damage. If the coil looks fine, try cleaning the contacts on both the coil and the battery.
Finally, if all else fails, take your vape to a professional for diagnosis and repair.
Can I Hit My Suorin While It’s Charging?
It is not recommended to hit your Suorin while it is charging as this could cause damage to the device. If you must hit it, do so gently.
How Do I Fix the Airflow on My Suorin Air Plus?
If you’re experiencing issues with the airflow on your Suorin Air Plus, there are a few things you can do to try and fix it. First, make sure that the device is fully assembled and that all of the parts are properly in place. Next, check to see if the coil is inserted correctly and that there is no debris blocking the air flow holes.
Finally, try priming the coil by taking a few draws without pressing the fire button – this will help get rid of any potential dry hits. If none of these solutions work, then it’s possible that the airflow control ring is defective and will need to be replaced.
Sourin Air Plus light Blinking/ problems fixed
Conclusion
If the Suorin Air Plus is blinking, it means that the device needs to be charged. The LED light will blink red when the battery is low, and will turn green when it is fully charged. If the Suorin Air Plus keeps blinking after being plugged in, try resetting the device by pressing the power button for 10 seconds.
If that doesn’t work, contact customer service.